hsShowSets Shell Command

Qualifiers:

<index_number>

Purpose:

Displays the MAC address On a local area network or other network, the MAC (Media Access Control) address is your computer's or IP telephone's unique hardware number. On an Ethernet device the MAC address is hard coded into the NIC. of any failed over devices.

Details:

• To use the commands, establish a secure telnet Telnet or Teletype Network is an Internet standard protocol for remote terminal connection service that allows a user to interact with a system at another site as if the terminal were connected directly to the remote machine. connection to port 2002 on the primary ICP.

• Entering the command without a qualifier displays all failed over devices in the cluster with associated index numbers. Specifying an index number shows a particular failed over device.

Example

Entry: hsShowIcps

System Response: