ALARMS
ALARMS ALL
REDUNDANT
RAID
Provides all alarm information for the specified alarm.
Refer to the available alarm categories and alarm thresholds.
REDUNDANT qualifier applies only to the CX II, CXi II, MXe and MXe Server fan, power supply, and hard drive. Use it to identify which redundant hardware component has failed. The system response varies depending upon whether the controller is equipped with SATA hard drives (MXe III) or PATA hard drives (all other controllers).
Note: REDUNDANT qualifier is not applicable to MCD for Industry Standard Servers (ISS).
On the SUPERCONSOLE 1000, this command is found under the REPORTS group of commands.
RAID qualifier applies only to an MXe III equipped with a RAID controller. Use it to debug the RAID controller and identify the following:
Link Speed - Data transfer rates for Host, HD1, and HD2 connections.
Link Detect Status - SATA physical connection status: No Device, No Comm, Okay, or Disabled.
NVM Detect State - HD 1 and HD 2 state in the RAID controller memory: Good, Bad, Rebuilding, or Broken.
Device State: HD 1 and HD 2 state: Good, Bad, Rebuilding, or Broken.
Device Status: HD 1 and HD 2 status: Idle, Device Init, SN Matches, SN Mismatch, ATAPI plugged in, Device Timeout, No device Plugged, Rebuild Failure
Match Status: As above.
RAID Size: Disk size available to the controller. (This can be smaller than the actual disk size.)
HD Drive Capacity: HD 1 and HD 2 actual disk size.
Model | Serial Number: Model and serial numbers of the RAID disks, which is used to protect the disks from corruption during installation.
Error Logs: Error logs used for troubleshooting.
System Response:
Current System : Alarm Major : viewed from Active |
|||||||
Category |
Total in System |
Unavailable |
Alarm Threshold Percentage |
||||
Total |
% |
Alarm |
Minor |
Major |
Critical |
||
Digital Links |
1 |
1 |
100 |
Major |
- |
>0% |
- |
System Response:
Category |
Total in System |
Unavailable |
Alarm Threshold Percentage |
||||
Total |
% |
Alarm |
Minor |
Major |
Critical |
||
SFT Zones |
1 |
0 |
0 |
|
- |
>0% |
100% |
System Response (MXe II or MXe Server with PATA hard drives):
Power Supply |
Installed |
Seated Fault |
Input Fault |
Output Fault |
Temp. Fault |
Fan Fault |
1 |
Yes |
No |
No |
No |
No |
No |
2 |
Yes |
No |
No |
No |
No |
No |
|
|
|
|
|
|
|
Fan |
Running |
1 |
Yes |
2 |
Yes |
Temperature Sensor |
Temperature |
Alarmed |
1 |
26 |
No |
2 |
29 |
No |
|
|
|
RAID controller temperature 26. RAID Temperature Alarm Inactive. |
|||
RAID controller rebuild is idle. |
|||
Hard Disk |
Installed |
Hard Fault |
Soft Fault |
1 |
Yes |
No |
No |
2 |
Yes |
No |
No |
System Response (MXe III with SATA hard drives):
Power Supply |
Installed |
Seated Fault |
Input Fault |
Output Fault |
Temp. Fault |
Fan Fault |
1 |
Yes |
No |
No |
No |
No |
No |
2 |
Yes |
No |
No |
No |
No |
No |
|
|
|
|
|
|
|
Fan |
Running |
1 |
Yes |
2 |
Yes |
Temperature Sensor |
Temperature |
Alarmed |
1 |
26 |
No |
2 |
29 |
No |
|
|
|
RAID controller temperature 26. RAID Temperature Alarm Inactive. |
||||
RAID controller rebuild is idle. |
||||
Hard Disk |
Installed |
Hard Fault |
Disk State |
Disk Status |
1 |
Yes |
No |
Normal |
Match |
2 |
Yes |
No |
Normal |
Match |
System Response (MXe III with RAID controller):
RAID Type |
: |
Silicon Image 5923 |
RAID Mode |
: |
RAID1 SAFE |
Currently Rebuilding |
: |
YES |
Last LBA Rebuild |
: |
284619520 91% complete |
| HOST ------ |
HD1 |
HD2 |
|
| Link Speed | 1.5g SATA I | 3G SATA II |
3G SATA II |
| Link Detect status | OKAY | OKAY |
OKAY |
HD1 |
HD2 |
|
| NVM Device State | Rebuilding | Good |
| Device State | Rebuilding | Good |
| Device Status | SN Matches | SN Matches |
| Match Status | SN Matches | SN Matches |
Raid Size |
: |
160041885696 bytes |
HD 1 Drive Capacity |
: |
160041885696 bytes |
HD 2 Drive Capacity |
: |
160041885696 bytes |
| HD 1 | Expected Model Number | : | ST9160314AS |
| Current Model Number | : | ST9160314AS | |
| HD 2 | Expected Model Number | : | WDC WD1600BEVT-00ZCT0 |
| Current Model Number | : | WDC WD1600BEVT-00ZCT0 | |
| HD 1 | Expected Serial Number | : | 5VC1Q63N |
| Current Serial Number | : | 5VC1Q63N | |
| HD 2 | Expected Serial Number | : | WD-WXC409818785 |
| Current Serial Number | : | WD-WXC409818785 |
| Error Logs from Sil5923: | |
| 0: | Empty |
| 1: | Empty |
| 2: | Empty |
| 3: | Empty |